Electric Fence Monitoring for Agriculture
Across farms, ranches, plantations, and apiaries, a fence fault can go unnoticed for hours. Safora sensors connect over LoRaWAN or cellular, so coverage reaches remote paddocks and sections with or without mobile signal.
When a fault or voltage drop occurs, farm managers are alerted within the minute, before livestock escape, a predator finds the gap, or wildlife gets in and damages crops.

What Safora brings to agriculture
Sub-minute alerting
When a fence fault occurs, you are notified within the minute. On large properties where a fault can go unnoticed until the next inspection, early detection makes the difference.
With or without cellular coverage
Choose LoRaWAN connectivity for remote sites, or Cellular where you have reception. Same sensor, either way.
Works with your fence
Compatible with a wide range of energizers and configurable for different voltage thresholds.
Tamper and theft detection
If a device is moved or interfered with, you are notified immediately. Useful on large properties where monitoring infrastructure can be difficult to keep an eye on.
Solar-powered
Deployed once, running for years. No wiring, no battery swaps, no maintenance visits needed across remote sections of your property.
Monitor your fences from the Safora dashboard, with real-time mobile alerts on any fault.
See Platform →Q&A
We typically recommend one Fence Shield every 1–2 km of fence. More sensors make it easier to pinpoint where along the line a fault is.
Each fault leaves a distinct voltage pattern. A drop to zero on every sensor at once usually means power loss, a dip that tapers off points to vegetation contact, and a uniformly low reading across the line often means poor grounding or a weak energizer battery.
Yes. The LoRaWAN version sends alerts over long-range radio to a gateway up to 15 km away in open terrain, with no SIM card needed at the fence line.